Loading...
 

To start up the μMETOS Blue you will need an Android based smart phone with:

  • Bluetooth
  • Location
  • Data access

The μMETOS Blue housing is closed with 6 M3 screws. To open them, you will need an Allen key of 2.5
mm. This is part of the delivery. For security issues in shipping the battery is unplugged so you will need
to open it and connect the battery.

  • Install https://play.google.com/store/search?q=umetos on your smart phone
  • Open the case of your μMETOS Blue by releasing the 6 screws
  • Plug the battery to its connector on the PCB
  • Allow (if is not allready) the location service in your smart phone
  • Run your uMETOS APP on your smart device
  • Press the connect button on the base of your μMETOS Blue

Note: the APP should launch the Bluetooth connectivity but in some cases the device may block this
option. Please check that Bluetooth connectivity is active.

  • Click on the icon in the left upper angle (marked with A on the picture below)
  • Click Add/Manage (marked with B on the picture below)
  • Peering process will start: when requested, introduce peer default code: 1234
  • Launch measurement by clicking on the wrench icon (marked with C on the picture below)

Umetosapp