Loading...
 

This is recommended to be done in an indoor environment (e.g. your office).
To correctly connect your CropVIEW unit to your PC please follow instructions on page Connect the CropVIEW to the PC.

Open a terminal window on your computer and select the right serial port associated with the camera in your system.

Place the jumper in position J1 and you will see the following text in terminal window:
============
USER: \ MAIN MENU
============
(1) SYSTEM
(2) CONTROL UNIT
(3) MODEM
(4) FLASH
(5) CAMERA

Select SYSTEM (press nr. 1 on your keyboard), and in the next menu select QUICK VIEW (again nr. 1). Now you will
see station info and its serial number (0700xxxx), where the 07 indicates that it is a CropVIEW product.
Press ESC button on your keyboard several times, to return to the main menu. Then Insert the SIM card in the
SIM card holder and fix it (you must hear a click when you lock it).

In terminal window select MODEM (3), then select SEND DATA (3) and finally remove the jumper from position J1
(in order to set up the spy mode). Now you will see in the terminal window the log information of the communication
process.

You should not see any error messages. In case of errors please check if the SIM card is unlock ed and make
sure that the 3G data service is available (in log of communication process should be indicated that it’s
connected through UMTS): 

bearer_type='UMTS'
mcc_current='232'
mnc_current='10'
mcc_sim='232'
mnc_sim='10'
sim_id='8943102101104029497'
apn_country='Austria'
apn='drei.at'
user='drei'
passw=''
roaming='0'
/>